HSFF6116
H&S Flex Frame Rake | 16-60″ Wheels With Panels | Raking Width 32′ | Tandem Rear Transport Wheels
$42,979.00
Weight: 5750lbs
| Model | FF6116 | FF6118 | FF6120 |
| Number of Wheels | 16 | 18 | 20 |
| Wheel Diameter | 60″ | 60″ | 60″ |
| Teeth Per Wheel | 40 | 40 | 40 |
| Tooth Diameter | 7.5 mm | 7.5 mm | 7.5 mm |
| Ground Pressure Rake Wheel Adjustment | Nut/Threaded Rod | Nut/Threaded Rod | Nut/Threaded Rod |
| Rake Wheel Hubs | Ball Bearings | Ball Bearings | Ball Bearings |
| Rake Wheel Anti-Wrap Shields | Standard | Standard | Standard |
| Rake Wheel Suspension | Independent “Bee Hive” Spring | Independent “Bee Hive” Spring | Independent “Bee Hive” Spring |
| Number of Raking Positions | 6 | 6 | 6 |
| Rake Wheel Wind Panels | Standard | Standard | Standard |
| Jack | Standard | Standard | Standard |
| Gauge Wheels | (4) 9.5L x 15 | (4) 11L x 15 | (4) 11L x 15 |
| Rear Transport Wheels | 4 – 11L X 15 | 4 – 11L X 15 | |
| Transport Width | 10′ 6″ | 11′ 6″ | 11′ 6″ |
| Transport Length | 32′ 7″ | 34′ 8″ | 37′ 6″ |
| Transport Height in Transport Position | 80″ w/SMV Sign | N/A | N/A |
| Maximum Raking Width | 32′ | 35′ 6″ | 38′ 6″ |
| Windrow Width Adjustment | 3′ – 5′ | 3′ – 5′ | 3′ – 5′ |
| Weight | 5,750 lbs. | 7,894 lbs. | 8,224 lbs. |
| Hydraulic Requirements | 1 Double Acting Cylinder For Folding – 1 Double Acting Cylinder for Rake Wheel Lift | 1 Double Acting Cylinder For Folding – 1 Double Acting Cylinder for Rake Wheel Lift | 1 Double Acting Cylinder For Folding – 1 Double Acting Cylinder for Rake Wheel Lift |
WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Flex Frame Rakes
H&S Flex Frame Rakes
- H&S Flex-Frame wheel rakes are available in 16, 18, 20, and 22 wheel models.
- The raking wheels are positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
- The rake beams and rake arms feature flex-joints for maximum flexibility over the terrain.
- A brake band on each front gauge wheels can be easily adjusted to field conditions.
- Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
- A large diameter rake wheel hub is used for added strength to the rake wheel dish.
- The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the Flex-Frame wheel rakes to fit varying conditions.
- The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
- The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
- Windrow width adjustment is made by a ratchet jack. A Hydraulic Rear Windrow Width Adjustment is Optional.
- Each rake beams articulates and flexes independently.
- Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set a pre-determined raking width.
- Rake wheel wind boards are standard on the Flex-Frame Rakes.
- Optional rear limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
- A center kicker wheel assembly is optional.
| Weight | 5750 lbs |
|---|