Westfield 8″ X 9′ Standard Transfer Auger
Pictured With Drive Kits – One Must Be Added To Complete Unit
Shipped Complete With:
- Pivot wheels
- 9ft Tube Section
- Rubber hopper extension
- Safety shields
Hopper Height – less rubber with wheels | Hopper Height – with rubber with wheels | Hopper Length | Total Length to center of spout | Hopper Width | Spout Height | Tube Length | Tube Dia. | Hyd. Requirements | Elect. HP Requirements | ||
A | B | C | D | E | F | G | H | ||||
Std. | S08-6 | 10¾” | 14½” | 48″ | 116″ | 32″ | 26″ | 6ft. | 8″ | 8-10 GPM 1500 PSI | 3-5 HP |
S08-9 | 10¾” | 14½” | 48″ | 148″ | 32″ | 40½” | 9ft. | 8″ | 8-10 GPM 1500 PSI | 3-5 HP | |
S10-6 | 12¼” | 16″ | 48″ | 116″ | 32″ | 26½” | 6ft. | 10″ | 10-12 GPM 1500PSI | 5-7.5 HP | |
S10-9 | 12¼” | 16″ | 48″ | 148″ | 32″ | 41½” | 9ft. | 10″ | 10-12 GPM 1500PSI | 5-7.5 HP | |
S13-10 | 14¼” | 18¼” | 60″ | 158″ | 40″ | 43″ | 10ft. | 12¾” | N/A | 10-15HP | |
LP | S10-6 LP | 10½” | 14¼” | 63″ | 18° =146″ 34° =139″ | 40″ | 18° =24″ 34° =43″ | 6ft. | 10″ | 10-12 GPM 1500PSI | 5-7.5 HP |
S10-9LP | 10½” | 14¼” | 63″ | 18° =180″ 34° =169″ | 40″ | 18° =35″ 34° =63″ | 9ft. | 10″ | 10-12 GPM 1500PSI | 7.5 HP | |
S13-10LP | 10½” | 14¼” | 63″ | 18° =192″ 34° =180″ | 40″ | 18° =37″ 34° =68 | 10ft. | 12¾” | N/A | 10-15HP |
4″ | 6″ | 7″ | 8″ | 10″ | 13″ | |
Recommended pulley size for 1750 RPM motors | 1A 2″-2¼ | 2B 3½” – 4″ | 2B 3½” – 4″ | 2B 3¼” – 3½” | 2B 3¼” – 3½” | 3B 3¼” – 3½” |
WFH08-2 | 8″ Hyd. Drive KitIncludes: Hydraulic motor (CHAR-LYNN 2000 series or equivalent), Mounting bracket, & Drive connector
Must Add: Hose and hose connectors |
Drive Kit
WFH08-3 | 8″ Electric Drive KitIncludes: Adjustable motor mount, large double pulley, belts, & shield.
Must Add: Motor & motor pulley. |
Electric Motors
Single Phase Motors | |||
MODEL # | HP | SHAFT | FRAME |
DY6K610 | 3 | 1 1/8″ | 184T |
DY6K847 | 5 | 1 1/8″ | 184T |
DY6K969 | 7 1/2 | 1 3/8″ | 215T |
Three Phase Motors | |||
MODEL # | HP | SHAFT | FRAME |
DY36VF28 | 3 | 1 1/8″ | 182T |
DY36VF05 | 5 | 1 1/8″ | 184T |
DY36VF32 | 7 1/2 | 1 3/8″ | 213T |
Pulleys
One Piece Pulley(s) | ||
PU35118D | 3.5″ X 1-1/8″ Pulley | DG |
Pulley(s) – Less Bushings | ||
PU34SHD | 3.4″ SH Pulley | DG |
Bushing(s) | ||
PU138SHB | 1-3/8″ SH Bushing |
WFH08-4 | 8″ Wheel Kit
Shipped With: 4.00 x 8 wheels/tires & adjustable carriage. Allows use of hoppers independent of auger when equipped with hydraulic or Electric drive. |
WFA160 | Hopper Tarp (Hardware Included)Fits S08/S10 and MK80-100 standard hoppers. |
WFA147 | 8″ Corn Screen With Cover
-Screen is located on the swing hopper tube or on the lower tube of a straight auger. |
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY