WLFGXD952-T590
FGXD952 Feller Buncher | Excavator | 360 Deg Slew | 52″ Dia Blade | 20″ Max Cut | T590 Mtr 25-45 GPM
$38,410.00
Weight: 4415lbs
Feller Buncher For Excavator
We are working to design a number of Feller Buncher models and welcome feed back in exchange for preproduction discounts. Our goal is to sell through dealers and then work with end users to develop compact harvesting solutions for skid steers and medium sized excavators. The first excavator mounted Feller Buncher we have build features a 52” cutting disc that can take up to 20” trees and is equipped with 18 beaver style cutting teeth. We also designed this excavator mounted feller buncher with a Slew Drive so there is continues rotation, no stop at any point.
It has an electric-over-hydraulic system which operates efficiently on hydraulic flows as little as 30 gpm and a smaller model would work on lower flow yet. Only one set of remote hydraulics is required to operate all functions if you have an AUX electrical connection. We are very open to requests for new features, larger or smaller models for both skidsteer and excavator.
| Model No | FBS752 | FGS952 | FGXD952 |
| Baumalight Connection Code | – | – | A03 |
| Mounting type | Skidsteer Mounted | Skidsteer Mounted | Excavator Mounted |
| Blade position | Fixed Horizontal Blade | Fixed Horizontal Blade | 360° Slew drive |
| Adaptor | Universal Skidsteer Adaptor | Universal Skidsteer Adaptor | Bolt-on Adaptor Slew Drive |
| PSI | 4000 PSI | 4000 PSI | 4000 PSI |
| Case drain | Requires Case Drain – Critical | Requires Case Drain – Critical | Requires Case Drain – Critical |
| Electrical Requirement | Requires 12V Electric | Requires 12V Electric | Requires 12V Electric |
| Electric AUX | Four 12V positive switchable signals required | Two 12V positive switchable signals required | Six 12V positive switchable signals required |
| Wire Supplied or not | Wire Supplied to AUX | Wire Supplied to AUX | Wire NOT Supplied |
| Hydraulic Hose and Couplers | Hoses Included Couplers NOT Included |
Hoses Included & Couplers NOT Included | Hoses & Couplers NOT Included |
| Blade diameter | 52″ Diameter Blade | 52″ Diameter Blade | 52″ Diameter Blade |
| Maximum cut | 20″ Max Cut | 20″ Max Cut | 20″ Max Cut |
| Blade Material | 3/4″ Steel Blade | 5/8″ AR400 | 3/4″ Steel Blade |
| Cutt thickness | 1 5/8″ Cutt Thickness | 1 5/8″ Cutt Thickness | 1 5/8″ Cutt Thickness |
| Number of edges per Tooth | 4 Edges Per Tooth | 4 Edges Per Tooth | 4 Edges Per Tooth |
| Number of teeth | 18 Teeth | 18 Teeth | 18 Teeth |
| Tooth part number | B8000 Beaver Teeth | B8000 Beaver Teeth | B8000 Beaver Teeth |
| Throat Opening at teeth | Throat Opening at teeth: 36″ | 36″ Throat Opening | 36″ Throat Opening |
| Weight | 2850 lbs | 2250 lbs | 4415 lbs |
36″ Throat Opening
The Feller Buncher has a 36″ wide throat opening at the teeth. This allows you to do a nice low cut on trees with a wide root flair.
BENT AXIS PISTON MOTOR
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
HEAVY DUTY FRAME
Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab.
BLADE MOUNTED ON HEAVY DUTY BEARING SUPPORT
The saw blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.
SAW BLADE SHIELDING
The durable shield encloses the blade for protection, directing the chips as it easily cuts through trees. Made with AR400 steel, the center log platform plate is designed to support the trees after they are cut.
CLEAN CUTS WITH B8000 BEAVER TEETH
The FGXD952 makes clean work of cutting trees safely and quickly, leaving the trunks and stumps with a clean cut.
The teeth are also able to be rotated for new sharp edges.
POWDERED COATED
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of forestry and helps prevent rusting.
ARMOURED AND SLEEVED HOSES
Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.
ROUNDED EDGES ON PUSH BAR/FELLER HOOK
To prevent trees from catching, the FGXD952 is designed with rounded edges on the push bar so they more easily slid as you push into a leaning tree.
GRABBER ARMS
The grabber arms have a robust design and are made with AR400 steel. The adjustable swing speed allows the operator better control when grabbing trees.
BOLT-ON SKIS
The skis are bolt-on for easy replacement.
SERVICE ACCESS
When it comes time to service, the FGXD952 is designed with full access to for easier service.
GREASEABLE PINS
Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.
HARDENED STEEL BUSHING
Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points.
What Is A Case Drain Line ?
On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.
Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.
How Important Is A Case Drain Line ?
If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.
Exception If You Have A Hammer Valve
There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.
Identifying Your Case Drain Line
The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.
Excavator Mounting
Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.
Blank Weld-On Plates
The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.
Turn-Key Custom Solutions
A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.
Add Connection Code
Click The Link Below To Find Your Specific D00**** Ex Mount
Add Turn Key Option That Corresponds With Your D00****
Please Note Your D00**** When Ordering
The Turn Key Pricing Includes The Connection Code Price
| Weight | 4415 lbs |
|---|