Baumalight MP972 Brush Mulcher | CAT 2 | 100-120 HP | 1.375″ 21-Spline 1000 PTO | 84″ Path Width
MP972 Fixed Tooth Mulcher for Power Take Off on a Tractor
The 900 series Baumalight mulchers will efficiently mulch heavy brush and trees and are designed for contractors, rental and any other heavy duty mulching and land clearing. The MP972 Brush Mulcher is designed to fit tractors with 90 – 135 HP and Cat 2 or 3 3PH. The 900 Series teeth are available in either Ripper or Planer style. The carbide Ripper tooth is the good general use tooth. Their v-shaped design shreds through brush and makes them less vulnerable in areas plagued by rocks and debris. The 900 Series Planer style tooth provides the most efficient cutting by smoothly chipping away at the brush. Its flat profile however makes it vulnerable to shattering on impact with rocks and other debris. Tractor mounted brush mulchers are not limited to reverse only, drive forward over your mulch and turn it into a finer mulch. A usefull feature on the Baumalight MP972 Brush Mulcher is the opening cutting shield. This allows you to adjust for a better, higher angle of attack on bigger brush or keep it closed and control the mulch for even finer results. With direct drive from the engine, all the way through the heavy duty gear box, to the teeth, the MP972 PTO Brush Mulcher is a very efficient way to clear heavy brush and small trees.
WIRE PROTECTION KIT
If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.
Planer Tooth Style
The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Ripper Tooth Style
Ripper style teeth is a general use tooth, offering operators a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Ripper teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
______________________________________________________________________________________________________________________________________________________________________________________________________
PRICES DO NOT INCLUDE SHIPPING OR SETUP – PRICED F.O.B. FACTORY