Name: WLMX960R-C950
SKU: 50583
Price: 39162.00 USD
Availability: InStock

Baumalight MX960R Brush Mulcher | Ex Mount | 18-33 Carrier Ton | 90″ Path | C950 Mtr 30-40 GPM

*Must Add Excavator Adaptor To Complete – See Tab Below

*Case Drain Required

*Hydraulic Hoses & Couplers NOT Included

*PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY

Mulcher Specs

MX960R Fixed Tooth Mulcher for Excavator, 18-33 Ton

The Baumalight MX960R Brush Mulcher has a 60” rotor and is designed for excavators starting at 18 ton up to 33 tons. The MX960R uses a fixed tooth holder comes with heavy duty double carbit tipped teeth (R9000), these teeth are ideal for vegetation management with lots of ground contact and don’t mind the occasional stone. Powered by a piston motor like all of the larger Baumalight mulchers the MX960R comes with aggressive root rake ripper teeth build into the frame to rip out rocks and move logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel and is equipped with replaceable body wear plates.

Model No.	MX230	MX330	MX530	MX530R	MX548	MX548R	MX948R	MX960R	MX1160R
Baumalight Connection Code	A02	A02	A02	A02	A03	A03	A03	A03	A03
Path Width	38″	38″	40″	40″	62″	62″	70″	90″	90″
Rotor Width	30″	30″	30″	30″	48″	48″	48″	60″	60″
Maximum Carrier Ton	6	8	12	12	20	20	30	33	33
Minimum Carrier Ton	2	3	4	4	8	8	12	18	18
Cutting Depth	Level	Level	1.5″ Above to 1″ Below Grade	1.5″ Above to 1″ Below Grade	1.5″ Above to 1″ Below Grade	1.5″ Above to 1″ Below Grade	Level	Standard level – Optional skid shoes for below ground	Standard level – Optional skid shoes for below ground
Holder Style	Swing	Fixed	Fixed	Fixed	Fixed	Fixed	Fixed	Fixed	Fixed
Cutting Style	Flall	High Speed Teeth	Carbide Tipped Bolt In	Carbide Tipped Bolt In	Carbide Tipped Bolt In	Carbide Tipped Bolt In	Double Tipped Carbide	Double Tipped Carbide	Sharpenable Planer teeth
Number of Cutters	22	36	64	64	104	104	27	38	31
Rotor Shaft Size	1.5″	2″	2″	2″	2″	2″	2″	2″	2″
Rotor Diameter (tool tips)	17.25″	15″	15″	15″	15″	15″	18.5″	18.5″	18.5″
Rotor Weight (with tools)	125 lbs	175 lbs	300 lbs	300 lbs	408 lbs	408 lbs	617 lbs	860 lbs	872 lbs
No. of Motor	1	1	1	1	1	1	1	1	1
System Protection	Built-In Rellef	Built-In Rellef	Built-In Rellef	Built-In Rellef	Built-In Rellef	Built-In Rellef	Built-In Rellef	Built-In Rellef	Built-In Rellef
Unit Weight	500 lbs	750 lbs	1036 lbs	1166 lbs	2167 lbs	2167 lbs	2838 lbs	2910 lbs	2925 lbs

Motor Specs

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

500 Series

MOTOR	PSI	CASE DRAIN	8 GPM	12 GPM	15 GPM	20 GPM	25 GPM	30 GPM	35 GPM	40 GPM	45 GPM	50 GPM	55 GPM	60 GPM
RPM			555	832	1060	1390
A450 Roller-Vane	2500 3000 3500	Not Needed Not Needed Recommended	0.25″ 0.5″ 0.5″	0.75″ 1″ 1″	1″ 1.25″ 1.25″	1.5″ 2″ 2″	— — —	— — —	— — —	— — —	— — —	— — —	— — —	— — —
RPM				640	846	1100	1370	1600
B550 Roller-Vane	2500 3000 3500	Not Needed Recommended Needed	— — —	0.25″ 0.5″ 0.5″	0.75″ 1″ 1″	1.25″ 1.75″ 1.75″	2.5″ 3″ 3″	3″ 3.5″ 3.5″	— — —	— — —	— — —	— — —	— — —	— — —
RPM			1090	1640	2050
C508 Bent Axis Piston	2500 3000 3500 4000	Critical	1″ 1.5″ 2″ 2.5″	1.75″ 2.25″ 2.75″ 3.25″	2.25″ 2.75″ 3.25″ 4″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM				1190	1490	2000	2490
C510 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	1.5″ 2″ 2.5″ 3″	2″ 2.5″ 3″ 3.5″	2.5″ 3″ 3.5″ 4.5″	3″ 3.5″ 4.5″ 5″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM						1450	1800	2100
C530 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	2.5″ 3″ 3.5″ 4.5″	3.5″ 4″ 4.5″ 5″	4.5″ 5″ 5.5″ 5.75″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM							1500	1800	2100
C540 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	— — — —	3.25″ 3.75″ 4.25″ 4.75″	5″ 5.5″ 5.75″ 6″	5.5″ 6″ 6.5″ 7″	— — — —	— — — —	— — — —	— — — —	— — — —
RPM								1600	1875	2140
C550 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	— — — —	— — — —	4.5″ 5″ 5.5″ 5.75″	6″ 6.5″ 7″ 7.5″	6.5″ 7″ 7.5″ 8″	— — — —	— — — —	— — — —	— — — —
RPM									1400	1630	1830	2030
C570 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	5.5″ 6″ 6.5″ 7″	5″ 5.5″ 6″ 6.5″	6.5″ 7″ 7.5″ 8″	7″ 7.5″ 8″ 8.5″	— — —	— — —
RPM											1400	1570	1750	1900
C590 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	4.5″ 5″ 5.5″ 6″	7″ 7.5″ 8″ 9″	8.5″ 9″ 9.5″ 10″	9″ 9.5″ 10″ 11″

Double brush size for “stop and chew” cutting for skidsteer models ONLY
NOTICE: Max GPM value must NEVER be exceeded on roller-vane motors or failure will occur, Piston motors run much faster before failure will occur
NOTICE: Above GPM values are under load flow estimates

900 Series

MOTOR	PSI	CASE DRAIN	20 GPM	25 GPM	30 GPM	35 GPM	40 GPM	45 GPM	50 GPM	55 GPM	60 GPM	65 GPM	70 GPM	75 GPM
RPM			1450	1800	2100
C930 Bent Axis Piston	2500 3000 3500 4000	Critical	3.5″ 4″ 4.5″ 5.5″	4.5″ 5″ 5.5″ 6″	5.5″ 6″ 6.5″ 7″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM				1500	1800	2100
C940 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	4.25″ 4.75″ 5.25″ 5.75″	6.25″ 6.5″ 6.75″ 7″	6.5″ 7″ 7.5″ 8″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM					1600	1875	2140
C950 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	5.5″ 6″ 6.5″ 6.75″	7″ 7.5″ 8″ 8.5″	7.5″ 8″ 8.5″ 9″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM						1400	1630	1830	2030
C970 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	5.5″ 6″ 7.5″ 8″	6″ 6.5″ 7″ 7.5″	7.5″ 8″ 8.5″ 9″	8″ 8.5″ 9″ 9.5″	— — — —	— — — —	— — — —	— — — —	— — — —
RPM								1400	1570	1750	1900
C990 Bent Axis Piston	3000 3500 4000	Critical	— — — —	— — — —	— — — —	— — — —	— — — —	6″ 6.5″ 7″	8.5″ 9″ 10″	10″ 10.5″ 11″	10.5″ 11″ 12″	— — — —	— — — —	— — — —
RPM			Adjustable
D97X2 Two speed (900 series)	2500 3000 3500 4000	Critical	4.25″ 5″ 5.5″ 6.75″	5.5″ 6.25″ 6.75″ 7.5″	7.75″ 8″ 8.5″ 8.75″	8.75″ 9.25″ 10″ 10.5″	9.25″ 10″ 10.5″ 11.25″	10.25″ 11″ 11.5″ 12.25″	11.25″ 12″ 12.5″ 13.25″	12.25″ 13″ 13.5″ 14.25″	13.25″ 14″ 14.5″ 15.25″	14.25″ 15″ 15.5″ 16.25″	15.25″ 16″ 16.5″ 17.25″	16.25″ 17″ 17.5″ 18.25″

1100 Series

MOTOR	PSI	CASE DRAIN	20 GPM	25 GPM	30 GPM	35 GPM	40 GPM	45 GPM	50 GPM	55 GPM	60 GPM	65 GPM	70 GPM	75 GPM
RPM			1450	1800	2100
C1130 Bent Axis Piston	2500 3000 3500 4000	Critical	4.5″ 5″ 5.5″ 6.5″	5.5″ 6″ 6.5″ 7″	6.5″ 7″ 7.5″ 8″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM				1500	1800	2100
C1140 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	6.25″ 6.75″ 7.25″ 7.75″	8.25″ 8.5″ 8.75″ 9″	8.5″ 9″ 9.5″ 10″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM					1600	1875	2140
C1150 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	8.5″ 9″ 9.5″ 9.75″	10″ 10.5″ 11″ 11.5″	10.5″ 11″ 11.5″ 12″	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —	— — — —
RPM						1400	1630	1830	2030
C1170 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	9.5″ 10″ 11.5″ 12″	10″ 10.5″ 11″ 11.5″	11.5″ 12″ 12.5″ 13″	12″ 12.5″ 13″ 13.5″	— — — —	— — — —	— — — —	— — — —	— — — —
RPM								1400	1570	1750	1900
C1190 Bent Axis Piston	2500 3000 3500 4000	Critical	— — — —	— — — —	— — — —	— — — —	— — — —	10″ 10.5″ 11″ 11.5″	12.5″ 13″ 13.5″ 14.5″	14″ 14.5″ 15″ 15.5″	14.5″ 15″ 15.5″ 16.5″	— — — —	— — — —	— — — —
RPM			Adjustable
D97X2 Two speed (1100 series)	2500 3000 3500 4000	Critical	5.5″ 6.25″ 6.75″ 8″	7.75″ 8.25″ 9″ 9.5″	10.5″ 11.25″ 11.5″ 12″	12.5″ 13″ 13.5″ 14.25″	13″ 13.75″ 14.25″ 15″	14.25″ 15″ 15.5″ 16.25″	15.5″ 16.25″ 16.75″ 18″	17.5″ 18″ 18.75″ 19.25″	18″ 18.75″ 19.25″ 20.5″	19″ 19.75″ 20.25″ 21.5″	20″ 20.75″ 21.25″ 22.5″	21″ 21.75″ 22.25″ 23.5″

REPLACEABLE BOLT-IN LINER

Save time by easily replacing the AR400 steel wear plates on the MX960R without needing to remove the rotor.

ADJUSTABLE BELT TENSIONER

The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.

OPTIONAL TWO-SPEED MOTOR

To maximize the rotor speed and torque to account for changing mulching material, the MX960R is available with a variable two-speed motor option.

BENT AXIS PISTON MOTORS ARE A STANDARD OPTION

Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.

WIRE PROTECTION KIT

If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.

CHAIN CURTAIN

The rear of the unit is guarded by a chain curtain so standing brush enters and mulched debris exits.

6 FREE TEETH

All MX960R Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.

EASY ACCESS GREASE FITTINGS

Reduce your regular maintenance time by easily greasing the bearings on the MX960R from outside the frame. No tools required.

OVERTORQUE PROTECTION - RELIEF VALVE

OVERTORQUE PROTECTION – RELIEF VALVE

The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure.

REINFORCED BELT

A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching.

What Is A Case Drain Line ?

On most skidsteer and excavator Hydraulic systems, Hydraulic motors and pumps require a case drain line. Sometimes referred to as a third line, the case drain line will relieve any excess pressure and drain it back to your return line, then into the reservoir. Without a properly installed case drain, that extra pressure could blow a seal or damage your hydraulic line. For higher flow motors or on piston and gear motors, a case drain line is always required. Although, no matter the size of your motor, a case drain is always a good idea as it will relieve the amount of pressure on your shaft seal, helping to prolong its life. A case drain line can also increase the efficiency of your hydraulic system as it will lower the back pressure on the tank line.

Since most machines have a unique style of coupler, BaumaLight does not include a coupler on our case drain line, although they are available. If your skidsteer is not equipped with a case drain, then it can be field installed.

How Important Is A Case Drain Line ?

If we say having a case drain is critical and you operate without one, you will blow out your shaft seal. Be sure to check the motor sizing charts on our website.

Exception If You Have A Hammer Valve

There is one exception in the need for a case drain on gear motors and that is if you excavator is equipped with a hammer valve, this is a larger free flow line back to tank.

Identifying Your Case Drain Line

The following galleries show a highlighted case drain line on multiple skidsteer and excavator models.

Planer Tooth Style

The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.

Ripper Tooth Style

Ripper style teeth is a general use tooth, offering operators a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Ripper teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.

WLD004427

Baumalight Tooth Holder For 900 Series Tooth (Weld-On) $85.00

Add to List

WLD004728

Baumalight P9000 Bolt-On Sub-Holder For T9000 Tip $65.00

Add to List

WLD004928

Baumalight Bolt For 900 Series Mulcher Tooth (M20-1.5 x 60) $8.56

Add to List

WLD004929

Baumalight Bolt To Bolt-On T9000 Tip (M14 x 1.5 x 35) $6.50

Add to List

WLR9000

Baumalight 900 Series Ripper Mulcher Tooth (EACH) $95.00

Add to List

WLT9000

Baumalight 900 Series Bolt On Planer Tip Tooth (EACH) $45.00

Add to List

Baumalight Excavator Mounting

Excavator Mounting

Baumalight offers two options to mount your attachment on your excavator, blank weld-on plates & turn key custom solutions. All Baumalight excavator mounting options are manufactured in Canada and our team of experts will work with you to ensure you receive the best solution for your excavator.

Blank Weld-On Plates

The bank weld-on plate is designed for you to weld on your own ear lugs for your specific excavator mount. The bolt pattern in the plate lines up with the bolt pattern on Baumalight attachments, allowing you to bolt the attachment in place.

Turn-Key Custom Solutions

A fully customized solution, the team at Baumalight designs and builds your custom excavator adaptor for your specific excavator to ensure that the attachment is ready to go to work as soon as it arrives.

Blank Weld-On Plate

WLD001419

Baumalight Blank Weld-On Plate For 8T To 25T Excavators (Bolts Not Included) $540.00

Add to List

WLD004952

Baumalight Set Of (26) 5/8" x 2" G5 Bolts With Lock Nuts | FREE If Mount Is Ordered With Wholegood $180.00

Add to List

Turn Key Solutions

To Complete Your Turn Key Solution Mount, Please Follow The Following Steps –

1. Click The “My Turn Key Mount” Button To Find Your Specific Earset For Your Excavator

2. Add The WL-A03 Connection Code & The Earset For Your Excavator To Your List

My Turn Key Mount

Turn Key Connection Codes
Turn Key Mounting

WL-A02

Baumalight A03 Small Bolt-On Plate Connection Code (D001161)

$0.00
WL-A03

Baumalight A03 Large Bolt-On Plate Connection Code (D001419)

$0.00
WL-A04

Baumalight A04 Excavator Connection Code (The Connection Plate Is 50% Of Turn Key Adaptor Price)

$0.00
WL-A05

Baumalight A05 Small 1 Auger Connection Code | Cross Pin Rough 1" Auger Drive (D001328)

$0.00
WL-A06

Baumalight A06 Small 1.5 Auger Connection Code | Cross Pin Rough 1.5" Auger Drive (D001386)

$0.00
WL-A07

Baumalight A07 Cradle 1 Auger Connection Code | RoughNeck Mounting - 1" Pin (D003527)

$0.00
WL-A08

Baumalight A08 Cradle 1.5 Auger Connection Code | RoughNeck Mounting - 1.5" Pin (D003528)

$0.00
WL-A20

Baumalight A20 Skid Steer Bolt On Plate Connection Code (D001534) | Add $200 Premium For This Option

$0.00
WL-A30

Baumalight A30 Connection Code

$0.00