Baumalight RSS780 Screw Splitter/Stump Planer | Universal Skid | SS 10,000 lbs Max | Max GPM 65 | Max PSI 5000
*Must Add Bit(s) To Complete – See Options Below
*Hoses Included – No Couplers (See Below For Coupler Options)
*The RSS380 & RSS580 Can Operate Without Case Drain If Hyd Pressure Is Under 2500 PSI. If Hyd Pressure Is Near Or May Exceed 2500 PSI, Connect Case Drain Hose On Splinter To Skid Steer Return To Sump / Reservoir Coupler.
*The RSS780 Must Have The Case Drain Hose Connected To The Skid Steer Return To Sump/ Reservoir Coupler.
RSS780
Splinter’s Log Splitter tool can split pieces of wood and logs up to 12 feet or even 20 ft long. The RSS Skidsteer models are mounted using a Skidsteer plate, the log splitter’s power comes from the hydraulically-driven motor mounting on a planetary drive, delivering a high amount of torque to the splitting head. The bit’s bite comes from machining two helical spirals machined into two pieces of steel. The two spirals join at the hardened tip for easy boring into the log. Driven on a 2” hex shaft or flange mount with an integrated shield that protects the drive from the rigors of splitting wood, the Log Splitter tool can tear into logs either horizontally or vertically.
RSS Skidsteer models have a Stump Planer tool that is designed to mount using a Skidsteer plate. The RSS model operates at a low RPM so that chips are contained during the operation with very little mess to clean up. Ideal for urban areas or confined spaces, the Stump Planer requires less power as it does not produce as fine material as a high speed cutting wheel. This enables larger stumps to be ground faster with smaller carriers, creating better mulch for other small trees. The Stump Planer tool features a hardened replaceable tip for extra-long wear and sharpenable cutting blades.
Model No. | RSS380 | RSS580 | RSS780 |
Splitter Tools | 2″ Hex 14×8 splitter cone (D002139) | 2″ Hex 14×8 splitter cone (D002139) | 8-bolt flange mount 14×8 splitter cone (D003935) |
Adaptor | SkidSteer plate | SkidSteer plate | SkidSteer plate |
Carrier Weight (Max lb) | 5000 | 6000 | 10000 |
Rec. GPM | 15-40 | 20-45 | 20-55 |
Max. GPM | 45 | 45 | 65 |
Rec. PSI | 2500-3000 | 2500-3000 | 2500-4500 |
Max. PSI | 3500 | 3500 | 5000 |
Drive Size | 2″ Hex | 2″ Hex | 8 Bolt Flange |
Drive Type | Planetary | Planetary | Planetary |
Hoses Included | Yes | Yes | Yes |
HEAVY DUTY BUILD
The Splinter screw wood splitter features a heavy-duty encasement that locks into place for long-lasting durability.
PROTECTIVE POWDER COAT FINISH
Heavy duty construction and a durable powder coated finish.
PLANETARY DRIVE
Power comes from the Splinter’s hydraulically-driven planetary drive, delivering up to 3,800 ft/lbs of torque.
NO 12V ELECTRIC REQUIRED
With no extra electrical cables, connection is quick and easy.
MAIN SHAFT SEAL PROTECTION
The Splinter’s flange protects the main shaft seal to prevent damage to the Splinter’s bearings from possible debris.
ONE PERSON MANEUVERING
One person can handle material without coming out of cab by drilling partially into the log and then carrying it to the desired location
ANTI-SLIP MAT FOR EASY ACCESS TO CAB
For ease of entry and exit from the cab an anti-slip strip gives sure footing.
EASY TO CHANGE BITS
Easily change from splitting to grinding.
HEAVY DUTY 8-BOLT FLANGE BIT HOLDER
The Splinter features a heavy duty 8-bolt flange bit holder.
PRESSURE GAUGE
The Splinter’s pressure gauge allows you to view work load during operation.
PISTON MOTOR
Developing torque through a reaction to pressure-reciprocating pistons, this latest motor design has the cylinder block and driveshaft mounted on an angle which produces a reaction against the drive-shaft flange.
SPLITTING FORCE
Much higher splitting force than a cylinder splitter with the same amount of pressure.
HARDENED REPLACEABLE TIP
The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life.
STUMP PLANER ATTACHMENT
Baumalight’s stump planer attachment operates at a low RPM so that chips are contained during the operation with very little mess to clean up. The planer’s entry tip is hardened for extra-long wear and replaceable for a longer life. The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. Both blades can be sharpened, lowering operating costs.
NO FLYING CHIPS
Because the Splinter operates at a low RPM, chips are contained during operation with very little mess to clean up.
IDEAL FOR URBAN AREAS
The planer is ideal for urban areas and confined spaces where keeping chips contained is critical.
LARGER CHIPS
With less power required to produce fine material, larger stumps can be ground faster with small carriers, creating mulch for other small trees.
HARDENED REPLACEABLE TIP
The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life.
HEAVY DUTY SHARPENABLE BLADES
The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. All cutting blades can be sharpened, lowering costs by not replacing blades as often.
____________________________________________________________________________________________________________________________________________________________________________
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY