Baumalight RSX580 Screw Splitter/Stump Planer | Up To 8 Ton Ex | Max GPM 45 | Max PSI 3500

PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB BV-ATWOOD, KS

*Must Add Bit(s) & Excavator Mount To Complete – See Below

*Unit Does NOT Include Hoses & Couplers

*The RSS380 & RSS580 Can Operate Without Case Drain If Hyd Pressure Is Under 2500 PSI. If Hyd Pressure Is Near Or May Exceed 2500 PSI, Connect Case Drain Hose On Splinter To Excavator Return To Sump / Reservoir Coupler.

*The RSS780 Must Have The Case Drain Hose Connected To The Excavator Return To Sump/ Reservoir Coupler.

RSX580

Splinter’s Log Splitter tool can split pieces of wood and logs up to 12 feet or even 20 ft long. The RSX models are designed with a bolt on excavator mount, the log splitter’s power comes from the hydraulically-driven motor mounting on a planetary drive, delivering a high amount of torque to the splitting head. The bit’s bite comes from machining two helical spirals machined into two pieces of steel. The two spirals join at the hardened tip for easy boring into the log. Driven on a 2” hex shaft or flange mount with an integrated shield that protects the drive from the rigors of splitting wood, the Log Splitter tool can tear into logs either horizontally or vertically.

The RSX excavator models have a Stump Planer tool that is designed to bolt on to your excavator. The RSX model operates at a low RPM so that chips are contained during the operation with very little mess to clean up. Ideal for urban areas or confined spaces, the Stump Planer requires less power as it does not produce as fine material as a high speed cutting wheel. This enables larger stumps to be ground faster with smaller carriers, creating better mulch for other small trees. The Stump Planer tool features a hardened replaceable tip for extra-long wear and sharpenable cutting blades.

Specs

Model	RSX380	RSX580	RSX780
Excavator Adaptor Code	A02	A02	A03
Splitter Tools	2″ Hex 14×8 splitter cone (D002193)	2″ Hex 14×8 splitter cone (D002193)	8-bolt flange mount 14×8 splitter cone (D003935)
Adaptor	Bolt on	Bolt on	Bolt on
Carrier Weight (Max lb)	3 ton	8 ton	18 ton
Rec. GPM	15-40	20-45	20-55
Max. GPM	45	45	65
Rec. PSI	2500-3000	2500-3000	2500-4500
Max. PSI	3500	3500	5000
Drive Size	2″ Hex	2″ Hex	8 Bolt Flange
Drive Type	Planetary	Planetary	Planetary
Hoses Included	No	No	No

HEAVY DUTY BUILD

Features a heavy-duty encasement that locks into place for long-lasting durability.

PROTECTIVE POWDER COAT FINISH

Heavy duty construction and a durable powder coated finish.

PLANETARY DRIVE

Power comes from the Splinter/Planer’s hydraulically-driven planetary drive, delivering up to 3,800 ft/lbs of torque.

NO 12V ELECTRIC REQUIRED

With no extra electrical cables, connection is quick and easy.

MAIN SHAFT SEAL PROTECTION

The Splinter/Stump Planer flange protects the main shaft seal to prevent damage to the Splinter’s bearings from possible debris.

ONE PERSON MANEUVERING

One person can handle material without coming out of cab by drilling partially into the log and then carrying it to the desired location

EASY TO CHANGE BITS

Easily change from splitting to grinding.

AUGER ATTACHMENT

Pengo’s patented 40/50 dual angle bolt on cutting can be flipped from a 40 degree cut angle to a 50 degree cut angle for a more aggressive cut in clay and hard pack dirt. Aggressor augers also come standard with our Tri-Flow Pilot bit. The three cutting blades make it easier to start a hole and keep the bit straighter.

Splitter Features

SPLITTING FORCE

Much higher splitting force than a cylinder splitter with the same amount of pressure.

HARDENED REPLACEABLE TIP

The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life.

Stump Planer Features

STUMP PLANER ATTACHMENT

Baumalight’s stump planer attachment operates at a low RPM so that chips are contained during the operation with very little mess to clean up. The planer’s entry tip is hardened for extra-long wear and replaceable for a longer life. The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. Both blades can be sharpened, lowering operating costs.

NO FLYING CHIPS

Because the Splinter operates at a low RPM, chips are contained during operation with very little mess to clean up.

IDEAL FOR URBAN AREAS

The planer is ideal for urban areas and confined spaces where keeping chips contained is critical.

LARGER CHIPS

With less power required to produce fine material, larger stumps can be ground faster with small carriers, creating mulch for other small trees.

HARDENED REPLACEABLE TIP

The Splinter’s entry tip if hardened for extra-long wear and replaceable for a longer life.

HEAVY DUTY SHARPENABLE BLADES

The smaller leading blade is made from AR500 steel and the larger clean up blade is made with AR400 steel. All cutting blades can be sharpened, lowering costs by not replacing blades as often.

Bits

WLD002507

2" Hex 14x8 Splitter Cone Assy With Replaceable Tip $1,199.00

WLRSX580

HEAVY DUTY BUILD

PROTECTIVE POWDER COAT FINISH

PLANETARY DRIVE

NO 12V ELECTRIC REQUIRED

MAIN SHAFT SEAL PROTECTION

ONE PERSON MANEUVERING

EASY TO CHANGE BITS

AUGER ATTACHMENT

SPLITTING FORCE

HARDENED REPLACEABLE TIP

STUMP PLANER ATTACHMENT

NO FLYING CHIPS

IDEAL FOR URBAN AREAS

LARGER CHIPS

HARDENED REPLACEABLE TIP

HEAVY DUTY SHARPENABLE BLADES

Excavator Mounting

Blank Weld-On Plates

Turn-Key Custom Solutions

Add Connection Code

Click The Link Below To Find Your Specific D00**** Ex Mount

Add Turn Key Option That Corresponds With Your D00****

Please Note Your D00**** When Ordering

The Turn Key Pricing Includes The Connection Code Price