WFMKX2-100-36G
Westfield MK2 10″ X 36′ Auger | Standard Hopper | Up To 6,000 BPH | 40 HP Req | 800 PSI Req
$18,560.60
Weight: 2217lbs
MKX2 100-36
The MKX2 100×36 combines a 36′ main tube and a 9′ swing away to make auger set up a breeze. Just drive the tractor up to the bin, lower and swing the hopper into position and you’re ready to load your truck or trailer. Best of all, the MKX2 100×36 Truck Loader offers the capacity, quality, and safety you’ve come to expect from Westfield.
MKX2 10-36 Features
- Flexible Positioning – Swing tube on left or right side
- Only 40 PTO HP required
- Manual Safety Winch Lift
- Height Raised – 22’7″
- Tubing – 14 gauge welded steel
- Flighting – 7 gauge with 10 gauge “Wear Edge” at grain transfer points
- Flighting Shaft – 2″ x 11 GA tubing
- PTO – 14 series with 5/16″ shear bolt
- HP Required – 40 hp
- Track – High yield 11GA roll formed
- Undercarriage – 3″ x 11GA A frame
- Axle – 2.5″ x 2.5″ x 1/8″ wall sq tubing
- Hubs and wheels – 4 bolt automotive hub, 15″ wheel
- Lift – Manual Safety Winch (Optional Elec Or Hydraulic) 1/4″ aircraft cable
Standard Hopper –
Open Discharge Spout
Open Discharge Spout
-
- Allows for more efficient flow out of the tube
- New tapered bearing for increased life span
- Equipped with plastic hood for sleeker appearance
- Reduced HP Requirements
- Included on 10”, 13” and 16” augers
Redesigned Boot
Redesigned Boot
-
- Separate boot flight with removable shafts
30’ Tubes & Flights
30’ Tubes & Flights
-
- Less tube flange and flight connections lead to less auger noise
- Less tube and flight hardware reduces time needed to assemble
- Common flight and tube lengths leading to less variation to stock
- Included on 10”, 13”, and 16” augers
Cylinder Updates
Cylinder Updates
-
- Commonize cylinders to use with various auger sizes (Fewer cylinders required to stock)
- Change from internal check valve to external check valve (Easier to access/service/replace in the field)
10"x50" Corn Screen | Screen Installed On Incline Tube Or Main Auger Lower Tube | FACTORY INST
$751.54
Westfield 10" Auger Reverser Kit | Reverses Flighting For Quick & Easy Cleanout | For MKX/MKX2-100
$1,131.02
Westfield 10" Hopper Hyd Lift Kit | Min 1200PSI - Max 2500 PSI | Min Hyd Flow 4.0 GPM | For MKX/MKX2
$2,393.48
Westfield Hyd Valve Assy Kit For A296 | To Run The Hyd Hopper Lift From The Auger Instead Of Tractor
$861.78
Westfield 10" Abrasion Resistant Flighting (Hopper, Neck, Incline, & Boot Flights) | MKX/MKX2-100
$1,456.44
Westfield 10" Electric Hopper Winch | For MK/MKX/MKX2-100's WITHOUT Electric Powerswing
$3,002.98
Westfield 10" Electric Hopper Winch | For MK/MKX/MKX2-100's WITH Electric Powerswings
$3,614.60
Return Credit For PTO Shaft (Blue) When Buying RA Drive Kit | For MK80 & MK/MKX/MKX2-100-36/53/63/73
$750.48
| Weight | 2217 lbs |
|---|