WW3318-100-096
WW Classic Series 9’6″ Connecting Post | 1-Way Drop Pin Section
$151.00
Classic Panels
Classic Panels have long been the standard for competition to live up to in the Livestock Equipment Industry. These are the Panels which prestigious organizations such as the CBR depend on year after year. Crafted by professionals from the finest material available, the Classic Series is compatible with each component from the Chaparral Series. All WW panel joints are saddle cut for extra strength. Choose a long lasting, attractive, powder coat finish pre-galvanized or hot dipped galvanized.
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- Panels and gates mount 6â² high on separate steel posts
- Ability to interchange panels and gates at any time without additional adapter or tools
- Both Sides Have (2) One-Way Female Connection Points To Interlock With Connecting Posts
WW Connecting Posts
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- All posts have one, two, three and four-way pins
- Panels and gates mount 6â² high on separate steel posts
- Ability to interchange panels and gates at any time without additional adapter or tools
- 7â² 8â³ posts and 9â² 6â³ posts designed to receive spreader bars and give stability to alleys
Classic High Pole GatesÂ
Classic Panels have long been the standard for competition to live up to in the Livestock Equipment Industry. These are the Panels which prestigious organizations such as the CBR depend on year after year. Crafted by professionals from the finest material available, the Classic Series is compatible with each component from the Chaparral Series. All WW panel joints are saddle cut for extra strength. Choose a long lasting, attractive, powder coat finish pre-galvanized or hot dipped galvanized.
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- Panels and gates mount 6â² high on separate steel posts
- Ability to interchange panels and gates at any time without additional adapter or tools
- Both Sides Have (2) One-Way Female Connection Points To Interlock With Connecting Posts
Classic Panel GatesÂ
Classic Panels have long been the standard for competition to live up to in the Livestock Equipment Industry. These are the Panels which prestigious organizations such as the CBR depend on year after year. Crafted by professionals from the finest material available, the Classic Series is compatible with each component from the Chaparral Series. All WW panel joints are saddle cut for extra strength. Choose a long lasting, attractive, powder coat finish pre-galvanized or hot dipped galvanized.
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- Panels and gates mount 6â² high on separate steel posts
- Ability to interchange panels and gates at any time without additional adapter or tools
- Both Sides Have (2) One-Way Female Connection Points To Interlock With Connecting Posts
Classic Gate-In-FrameÂ
Classic Panels have long been the standard for competition to live up to in the Livestock Equipment Industry. These are the Panels which prestigious organizations such as the CBR depend on year after year. Crafted by professionals from the finest material available, the Classic Series is compatible with each component from the Chaparral Series. All WW panel joints are saddle cut for extra strength. Choose a long lasting, attractive, powder coat finish pre-galvanized or hot dipped galvanized.
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- Panels and gates mount 6â² high on separate steel posts
- Ability to interchange panels and gates at any time without additional adapter or tools
- Both Sides Have (2) One-Way Female Connection Points To Interlock With Connecting Posts
WW Spreader Bars & Posts
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- All posts have one, two, three and four-way pins
- 7â² 8â³ posts and 9â² 6â³ posts designed to receive spreader bars and give stability to alleys
Alley Control Gates / Frames
- Create a single file alley of any length by attaching panels to alley control gates and frames.
- Alley Control Gates / Frames are Measured center to center of frame uprights.
- Spring-activated gate latches and 2â³ standard pipe hinges give WW gates trouble-free service
- 32″ Frames & Gates Have 3-Way Male Pin Connection Points On Each Side
- 38-1/2″ Frame Has 2-Way 180 Degree Male Pin Connection Points On Each Side
- Adjustable Alley Frames Have 2-Way 180 Degree Male Pin Connection Points On Each Side
Why We Use Alley Control Gates / Frames
Cattle alley gates are an integral part of your cattle handling system. They create the stop gate strategy that allows stockmen and women to safely and efficiently work cattle through the system. Alley gates are essential in regulating cattle flow through your handling system.
Placement of cattle alley gates is dependent on the type of cattle handling system, location, and uses. Curved and straight configured alleys have different set points for the alley gates. The number of cattle being worked in a system is another determining factor for where stop gates may be necessary.
Cattle flow, or the lack thereof, is the goal of stop gate strategy. Placement of alley gates in your cattle handling system is all about regulating flow. It is important to only place the gates where you need them; too many gates can negatively disrupt cattle flow and create balking issues.
Alley gates prevent extra animals from entering the chute, can keep cattle from moving backwards, and ensure that the cattle handling system does not become overcrowded.
Placing Your Alley Control Gates / Frames
Alley gates should make your handling system safer and more efficient. Using rolling cattle alley gates will allow you to move them as needed in your system, depending on the size of cattle, or number of head being worked. This adaptability adds longevity to your system, as it can grow and change with your operation.
Use the following guidelines to place your alley gates:
- The rule of thumb is to have one alley gate at the entrance from the cattle tub, and one before the squeeze chute as a stop gate preventing extra animals from entering. Additional alley gates are placed in larger systems. In a small system, these two may be enough.
- Longer cattle handling systems require more alley gates than shorter systems. In a longer system, use alley gates to separate cattle into smaller groups, or ease the flow into the chute.
- You may need to add alley gates in places where the cattle handling system branches off. Examples include before a loading ramp, at the calf table, or ahead of sorting pens.
There is no golden rule for the number of alley gates to add to a cattle handling system, or where they should be placed. As a stockman or woman, you know your preferences for working cattle, and should place gates in locations that will increase efficiency and safety on your operation. Strategically placed alley gates will simplify and streamline the cattle handling process.
Cattle handling system design, handler technique, and cattle behavior are intertwined in the success or failure of cattle handling on your operation. When all factors are in check, the right corral and cattle handling system design can ease stress for cattle, and make the handlersâ job easier.
Classic Feeder Panels
Classic Panels have long been the standard for competition to live up to in the Livestock Equipment Industry. These are the Panels which prestigious organizations such as the CBR depend on year after year. Crafted by professionals from the finest material available, the Classic Series is compatible with each component from the Chaparral Series. All WW panel joints are saddle cut for extra strength. Choose a long lasting, attractive, powder coat finish pre-galvanized or hot dipped galvanized.
- 2â³ x 14 gauge material with 50,000 P.S.I. yield strength
- Panels and gates mount 6â² high on separate steel posts
- Ability to interchange panels and gates at any time without additional adapter or tools
- Both Sides Have (2) One-Way Female Connection Points To Interlock With Connecting Posts
Palpation Cages
- 1-1/2â³ Schedule 40 Pipe
- Palpation Cages have single female connection points @ 2 locations on both sides.
Rolling Block Doors
- 2-1/4â³ 13 Ga Tubing
Panel Mounting Brackets
U-Bolt Panel Mounting Brackets To Any Panel To Add Additional Panels To Your Operation.
If You Want To Angle Panels Left Or Right, Be Sure To Get The LH Or RH Panel Depending On Your Plans.Â
Terrian Adjustment Brackets
Use This Wedge To Put A Panel On Uneven Ground.
Horseback Gate Latches
Designed for ease of opening from horseback, the horseback latch handle is fabricated from 1-3/4â x Âĵâ Strap, 43-1/2â long. Handle has pre-punched holes designed to receive rope. Handle is attached to plunger latch which consists of 1â round bar plunger bolt with ½â threaded stem housed in 1â standard pipe, 8â long. Recoil action is provided by a compression spring on the threaded stem between the latch bolt and back of housing.
AFC Calf BlocksÂ
- Single & Dual Calf Block Has Single Female Connection Points On Both Sides
