Name: WFDF614-P
SKU: 38978
Availability: InStock

Westfield Tailgate / Drill-Fill Auger | Poly Flighting | 8-12 GPM @ 1400 PSI

Price Does Not Include Setup Or Shipping – F.O.B. Factory

Westfield Drill-Fill / Truck Auger

Rear mount 6″ x 15-1/2′ fold down drill fill with One-Pin mount system for quick on/off
Spring assisted lift with ground level lever for transport/operate positioning
4.5 cubic inch hydraulic motor with 12 volt electric solenoid control valve
14-1/2′ telescoping spout with on/off switch
Clean out door with cam lock
Large opening in hopper for quick dumping of grain
Mounting brackets

Note: Requires a minimum of 8.0 GPM at 1400 PSI (Maximum of 12.0 GPM)

Westfield Rear Mount Drill Fill Augers | Designed For Easier Bulk Handling

It’s on or off in a jiffy with one single mounting pin. You don’t even need a wrench. The long 6″ by 15½’ auger allows full tarping of the load. And there’s a convenient remote on-off control on the 14½” telescoping downspout. The 4.2 cu. in. hydraulic motor with standard 12 volt solenoid control is located at the bottom of the auger requiring minimum plumbing.

Poly Cupped Flight

• Injection molded for consistent quality – each module is assembled onto a stainless steel or mild steel center tube.
• Interlocking lap joint (patented) – produces a substantially smooth, strong, and continuous surface.
• Strong, abrasion-resistant flighting.

The Lundell Corporation has combined the proven gentleness and durability of high density polyethylene with the cupped design in auger flighting. Injection molded for consistent quality, each poly-flight module is assembled onto a mild steel or stainless steel hexagon tube. The modules fasten together using a patented interlocking lap joint. This feature produces a strong, smooth, continuous surface that has proven itself through years of conveying grain, dry fertilizer, blasting shot, salt, and many other materials.

A Plastic Auger That’s Tough to Beat

Go ahead and try. Lundell’s Poly Cupped Flighting is tough enough to handle anything you throw its way. That’s why top manufacturers have been including it as standard equipment for years. With the high-tech durability to rival steel, Poly Cupped Flighting has become the choice of the hardest- working machines around.

Protect Your Seed Investment

With sprays and treatments available by the truckload, ‘yield’ seems to be the word of the day. Yet there’s one sure way to maximize your yield potential from the start: be sure to deliver intact seed to your field! Poly Cupped Flighting is designed to do just that; deliver more intact seed through gentle seed handling.University testing concludes that Lundell’s Poly Cupped Flighting delivers noticeably more intact seed to your field.

Higher Germination Rate

University testing proves that our poly will only decrease germination by 1.5%. Our closest rival decreases germination by nearly 4 times as much.*

Seed Remains Intact

Another university test proves that with our poly, 99.62% of your seed stays intact. Steel is shown to do 5 times more damage to your seed.

Soybean Crack Test Results *
Flighting Type	Percent Breakage	Average Breakage
Plastic Cup	0.38%	38
Bristle	0.35%	35
Steel	1.80%	180
Steel Cup	2.10%	210
Average breakage based on per 10,000 beans. Test ran with hydraulic motor at 12 gal/min (6” x 13’ uni-swivel auger at a 45° angle). Average moisture content of the bean seed samples was 12%.