Westfield STX Series 10″ X 31′ Auger
To Complete Auger, A Electric Or Gas Motor Must Be Added – See Requirements.
Shipped Complete With:
- Auger
- Manual Standard SP Mover Package (Includes 2 Wheels)
- EMD/MD Motor Mount & Battery Mount
- Double Belt & Pulley
- Standard Outlet Spout
- Tow Hitch
- Safety Shields
- Winch
- Mounted Tires
Westfield STX2 Series
STX2 80 | up to 3,500 bph | 31′- 51′ lengths
STX2100 | up to 5,500 bph | 31′- 51′ lengths
Westfield‘s redesigned truck auger has been engineered to withstand the demands of farming today. The STX2 was built for durability, longevity and capacity. With the STX2, you’ll get the job done fast.
Durable – Built to Last Long
The STX2 features 12-gauge tubing on the 10″ model, a heavy-duty motor mount designed to handle high horsepower, heavy auger engines, giving you the flexibility to use the engine you want. Like all Westfield augers, the flighting includes Wear Edge Technology™, which provides an extra layer of steel welded to the edge at critical wear points. The purpose-built hose routing provides a cleaner sleeker look and protects the hoses from the elements and the powder coat paint protects and provides a long lasting durable finish. Heavy-duty hardened steel sprockets and high speed roller chain are sized to match auger length and diameter. A lubricated upper drive extends the life of sprockets and drive chain. The 10″ models use square, one-bolt flight connections to ensure the flighting maintains proper alignment for smooth operation.
Fast – Designed for High Capacity
The STX2 uses double banded belts that are molded together as one to transfer maximum power from the engine to the gearboxes to maintain consistent speed when the auger is running. To ensure optimal performance is achieved with longer units, the 10″ in 46′ and 51′ lengths use triple banded belts.
Simple – Developed for Ease-Of-Use
Westfield’s STX2 is designed with end users in mind. The self-leveling motor maintains proper tension at all heights, so there is no need to reset the belt tension once the auger is raised into position to provide better traction. Less slippage means you can get the job done faster. The electric clutch with remote allows you to start and stop the auger without shutting down gas engine drives.
Low Maintenance – Work More, Worry Less
The drive shaft bearings are constructed of durable oil impregnated hardwood for long, quiet operation and can be easily replaced if needed without disassembling the drive shaft. The bearing brackets are factory jig welded to ensure precise= alignment. The chain tensioner on the top drive can be easily adjusted and provides consistent chain drive tension, helping to prolong the life of the chain.
Extended Warranty
Westfield is committed to providing quality products. To ensure your STX2 is ready when you need it, Westfield has extended their program to 2 years limited warranty.
Convenient – Easy To Transport
The STX2 features a quick detach tow hitch that can be stored on the auger so it’s ready to go when you need it. Moving around the yard is easy with the optional Heavy-duty mover kit.
To Complete Auger, A Electric Or Gas Motor Must Be Added:
Electric Drive
Recommended pulley size: 6.5″ – 7″ for 1750 RPM electric motors.
(Must Add Motor & Motor Pulley)
Three Phase Motors | |||
MODEL # | HP | SHAFT | FRAME |
DY6AJD1 | 15 | 1 5/8″ | 254T |
DY6AJD4 | 20 | 1 5/8″ | 256T |
DY6AJD7 | 25 | 1 7/8″ | 284T |
Pulleys – Less Bushings | ||
PU64SDSD | 6.4″ SDS Pulley | DG |
PU74SKD | 7.4″ SK Pulley | DG |
Bushings | ||
PU158SDS | 1-5/8″ SDS Bushing | |
PU158SKB | 1-5/8″ SK Bushing | |
PU178SDSB | 1-7/8″ SDS Bushing | |
PU178SKB | 1-7/8″ SK Bushing |
Gas Drive
Recommended pulley size: 4.2″ for gas engines.
(Must Add Motor, Muffler, Fuel Tank, & Electric Clutch Kit)
Motors | |
WFP1031089 | Kohler 26.5 HP Gas Engine
Unit Features: 1-1/8” Shaft, Saves significantly on fuel, with less downtime for refueling, 3-year unlimited-hour limited commercial warranty, Advanced sensor technology allows engine to optimize performance by automatically adapting to operating conditions, Starts like your car – just turn the key and go, 4-Cycle, OHV, Cast iron cylinder liners, Aluminum block, & Electronic fuel injection. |
KOPA-CH750-3005 | Kohler 27hp Gas Engine
Unit Features: Twin Cylinder, 1-1/8″ Crankshaft, Electric Start, flat air filter only, hardened crankshaft journals, high-efficiency fan and screen, larger dual-element air filter with foam pre-cleaner, cast iron cylinder liners, hydraulic valve lifters, full-pressure lubrication, spin-on, & full-flow oil filter. (Must Add Muffler To Complete Unit) |
WFP1031110 | Kohler 32 HP Gas Engine
Unit Features: 1-1/8” Shaft, Integrated oil coolers extend oil-change intervals and maintain low temperatures during the entire power range, High-efficiency, heavy-duty air filters provide protection from debris and ensure longer service intervals, Extra-large sleeve bearings support heavy loads in commercial and industrial environments, 4-Cycle, OHV, Cast Iron Cylinder Liners, & Aluminum Block. |
WFP1031120 | Kohler 35 HP Gas Engine
Unit Features: 1-1/8” Shaft, Integrated oil coolers extend oil-change intervals and maintain low temperatures during the entire power range, High-efficiency, heavy-duty air filters provide protection from debris and ensure longer service intervals, 4-Cycle, OHV, Cast Iron Cylinder Liners, & Aluminum Block. |
Mufflers | |
KO2478608-S | Muffler Kits for Westfield MD Series |
KO2478612-S | Muffler Kits for Above Engines (18-30 HP) |
Gas Tank Kit(s) | |
WFA415 | STX Gas Tank Package, 42L with Hose |
Electric Clutch Kits | |
WFA224 | Electric Clutch Kit 1 1/8″ Shaft Size |
WFA482 | 10” Enclosed Hopper Kit |
WF28109 | BATTERY CABLE (set of two) |
WFA164 | Poly Bucket Flex Spout, 36″-5 section, fits 8″-10″ augers |
WFA282 | No Snag Poly Flex Spout, 3-section, fits 10″ augers |
WFA104 | Big Round Poly Hopper, yellow, 50″ diameter, 20″ deep fits augers to 10″ |
WFA120 | Replacement Straps for WFA104 hopper, each |
WFA223 | V-Hopper w/improved cleanout, fits augers to 10″ |
WFA148 | 10″ Corn Screen With Cover |
WFA249 | 10″ Bin Hopper for WR/TFX2/STX2 |
WFA285 | Hopper Tarp Fits WR/TFX2/STX2 8/10″ Intake Hopper |
WFA179 | 10″ x 3′ extension |
WFA197 | Hydraulic Winch |
UMH10-3 | 10″ x 3′ Long Galvanized Flex Hose |
UMH10-5 | 10″ x 5′ Long Galvanized Flex Hose |
Westfield Auger Calculators
Auger Length
Formula for calculating the length of auger required to fill a bin:
STEP #1: Determine distance (H) from ground to eave of bin.
STEP #2: Add distance from Step #1 to 1/2 of bin diameter (D).
STEP #3: Multiply total figure from step 2 by 1.4.
STEP #4: The figure determined in Step 3 is the exact length of auger needed. Use the next longer length of Westfield Auger
TOTAL FORMULA
(H + 1/2D) x 1.4= Auger Length
Flight Speed
Gas Motor RPM=3,000 Electric Motor RPM=1,750
TOTAL FORMULA
(Top Sprocket/Bottom Sprocket) x (Motor Pulley/Auger Pulley) x Motor RPM = Flight Speed
___________________________________________________________________________________________________________________________________________________________________________
Back Freight: $270.92
PRICE DOES NOT INCLUDE SETUP OR SHIPPING – PRICED FOB FACTORY